beautypg.com

Maintenance and care – FORD 2002 Explorer v.1 User Manual

Page 274

background image

Replacing high-mount brake lamp bulbs

1. Remove the two screws and move
the lamp assembly away from the
liftgate.

2. Remove the bulb holder from the
lamp assembly by depressing the
snaps.

3. Pull the bulb straight out of the
socket and push in the new bulb.

To complete installation, follow the
removal procedure in reverse order.

USING THE RIGHT BULBS

Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized “D.O.T.” for North America and an
“E” for Europe to assure lamp performance, light brightness and pattern
and safe visibility. The correct bulbs will not damage the lamp assembly
or void the lamp assembly warranty and will provide quality bulb burn
time.

Maintenance and care

274