beautypg.com

Maintenance and specifications – FORD 2002 Excursion v.2 User Manual

Page 228

background image

only if they provide cold weather protection without damaging the
vehicle’s paint finish, wiper blades or washer system.

Note: Do not put washer fluid in the engine coolant reservoir. Washer
fluid placed in the cooling system may harm engine and cooling system
components.

Checking and adding washer fluid for the liftgate

Washer fluid for the liftgate is supplied by the same reservoir as the
windshield.

ENGINE OIL

Checking the engine oil

Refer to the scheduled maintenance guide for the appropriate intervals
for checking the engine oil.
1. Make sure the vehicle is on level ground.
2. Turn the engine off and wait a few minutes for the oil to drain into the
oil pan.
3. Set the parking brake and ensure the gearshift is securely latched in P
(Park).
4. Open the hood. Protect yourself from engine heat.

5. Locate and carefully remove the
engine oil level indicator (dipstick).

6. Wipe the indicator clean. Insert the indicator fully, then remove it
again.
• If the oil level is between the MIN and MAX marks, the oil level is

acceptable. DO NOT ADD OIL.

Maintenance and Specifications

228