beautypg.com

Locks and security – FORD 2002 Excursion v.2 User Manual

Page 111

background image

Power door unlock disable feature (if equipped)

This feature will help protect your
vehicle from unauthorized entry.

The UNLOCK function on the power
door switch will not operate with
the ignition OFF and twenty
seconds after the doors are closed
and electronically locked by the
remote entry transmitter, key pad, or power door switch (if pressed
while the door was open).

The UNLOCK function will operate again after you unlock the vehicle
using the remote entry transmitter or key pad, turn the ignition to ON,
or open the door from inside of the vehicle.

Power door unlock disable feature — activation/deactivation

1. Turn the ignition key to ON.

2. Press the UNLOCK button 3 times.

3. Turn the ignition key to OFF.

4. Press the UNLOCK button 3 times.

5. Turn the ignition key to ON. The horn will chirp.

6. Press the LOCK button 2 times. You should receive 2 horn chirps to
indicate the system has been disabled, or 2 chirps followed by a honk to
indicate the system has been enabled.

Note: Pressing the power door LOCK button two times again will turn
the feature ON if it was previously OFF, or OFF if it was previously ON.
Every two consecutive presses of the LOCK button after successfully
entering the configuration mode will change the enable/disable condition
of the feature.

7. Turn ignition to OFF to exit programming. The horn will chirp once to
confirm the procedure is complete.

Locks and Security

111