Lights – FORD 2003 Mustang v.1 User Manual

Page 70

Text mode
Original mode

4. On the wall or
screen you will observe
a light pattern with flat
edges at the top of the
beam pattern. If the
flat edges are not at
the horizontal
reference line, the beam will need to be adjusted.

5. Locate the vertical adjuster on each headlamp,
then use a 6 mm allen wrench or screwdriver to
adjust the headlamp up or down.

6. HORIZONTAL AIM IS NOT REQUIRED FOR THIS
VEHICLE AND IS NON-ADJUSTABLE.

7. Close the hood and turn off the lamps.

TURN SIGNAL CONTROL
• Push down to

activate the left turn
signal.

• Push up to activate

the right turn signal.

INTERIOR LAMPS

Map lamps (if equipped)

If equipped with a
convertible top the
map lamps and
controls are located on
the rearview mirror.
Press the controls on
the bottom of the
mirror to activate the
lamps.

OFF

Lights