beautypg.com

Maintenance and specifications – FORD 2003 Escort User Manual

Page 141

background image

WINDSHIELD WASHER FLUID

Windshield washer fluid

Check the washer fluid whenever
you stop for fuel. The reservoir is
highlighted with a

symbol.

If the level is low, add enough fluid
to fill the reservoir. In very cold
weather, do not fill the reservoir all
the way.

Only use a washer fluid that meets
Ford specifications. Refer to
Lubricant specifications in this
chapter.

State or local regulations on volatile
organic compounds may restrict the
use of methanol, a common windshield washer antifreeze additive.
Washer fluids containing non-methanol antifreeze agents should be used
only if they provide cold weather protection without damaging the
vehicle’s paint finish, wiper blades or washer system.

If you operate your vehicle in temperatures below 4.5° C (40°
F), use washer fluid with antifreeze protection. Failure to use

washer fluid with antifreeze protection in cold weather could result in
impaired windshield vision and increase the risk of injury or accident.

Note:Do not put washer fluid in the engine coolant reservoir. Washer
fluid placed in the cooling systemmay harmengine and cooling system
components.

ENGINE OIL

Checking the engine oil

Refer to the scheduled maintenance guide for the appropriate intervals
for checking the engine oil.

1. Make sure the vehicle is on level ground.

2. Turn the engine off and wait a few minutes for the oil to drain into the
oil pan.

3. Set the parking brake and ensure the gearshift is securely latched in P
(automatic transaxle) or 1st (manual transaxle).

Maintenance and Specifications

141