Lights – FORD 2003 Escort User Manual

Page 36

Text mode
Original mode

Vertical aim adjustment

1. Park the vehicle on a level
surface.

2. With the hood open, locate the
bubble level and the vertical
adjustment screw. The adjustment
screw is located on the outboard
side of the headlamp below the
headlamp upper attachment.

3. The “UP” and “DN” on the bubble
indicate the directional change (up
or down) of the vertical aim.

4. Use a 4 mm wrench or socket to
turn the vertical adjusting screw
clockwise or counterclockwise until
the bubble is centered between the
lines.

Repeat the above process to the other headlamp, if necessary.

TURN SIGNAL CONTROL
• Push down to activate the left

turn signal.

• Push up to activate the right turn

signal.

OFF

Lights