beautypg.com

Maintenance and specifications – FORD 2004 Focus v.2 User Manual

Page 194

background image

5. Remove the dipstick, wiping it clean with a clean, dry lint free rag. If
necessary, refer to Identifying components in the engine compartment
in this chapter for the location of the dipstick.

6. Install the dipstick making sure it is fully seated in the filler tube.

7. Remove the dipstick and inspect the fluid level. The fluid should be in
the designated areas for normal operating temperature.

Low fluid level

Do not drive the vehicle if the fluid
level is at the bottom of the dipstick
and the outside temperatures are
above 10°C (50°F).

Correct fluid level

The transmission fluid should be checked at normal operating
temperatures 66°C-77°C (150°F-170°F) on a level surface. The normal
operating temperature can be reached after approximately 30 km (20
miles) of driving.

The transmission fluid should be in
this range if at normal operating
temperature (66°C-77°C
[150°F-170°F]).

High fluid level

Fluid levels above the safe range
may result in transaxle failure. An
overfill condition of transmission
fluid may cause shift and/or
engagement concerns and/or
possible damage.

High fluid levels can be caused by an overheating condition.

2004 Focus (foc)
Owners Guide (post-2002-fmt)
USA English
(fus)

Maintenance and Specifications

194