beautypg.com

Seating and safety restraints – FORD 2004 F-150 v.4 User Manual

Page 110

background image

2. Grasp the shoulder portion and
pull downward until the entire belt
is extracted.

3. Allow the belt to retract. As the belt retracts, you will hear a clicking
sound. This indicates the safety belt is now in the automatic locking
mode.

How to disengage the automatic locking mode

Disconnect the combination lap/shoulder belt and allow it to retract
completely to disengage the automatic locking mode and activate the
vehicle sensitive (emergency) locking mode.

After any vehicle collision, the safety belt systems at all outboard
seating positions (except the driver position, which does not

have this feature) must be checked by a qualified technician to verify
that the automatic locking retractor feature for child seats is still
functioning properly. In addition, all seat belts should be checked for
proper function.

BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if
the seat belt assembly “automatic locking retractor” feature or

any other seat belt function is not operating properly when checked
according to the procedures in Workshop Manual. Failure to replace
the Belt and Retractor assembly could increase the risk of injury in
collisions.

Safety belt pretensioner

Your vehicle is equipped with safety belt buckle pretensioners at the
driver and front outboard passenger seating positions.

Do NOT place objects between the seats, this could interfere
with the functioning of the pretensioner.

2004 F150 (f12)
Owners Guide (post-2002-fmt)
USA English
(fus)

Seating and Safety Restraints

110