beautypg.com

Replacing stop/tail/turn/backup bulbs, Lights – FORD 2005 Freestyle v.2 User Manual

Page 59

background image

3. Locate the front sidemarker lamp
electrical connector and remove it
by pulling it off.

4. Remove the bulb socket by
turning it counterclockwise and
pulling it straight out.

5. To remove the bulb, pull it
straight out of the bulb socket.

Install the new bulb(s) in reverse order.

Replacing stop/tail/turn/backup bulbs

The stop, tail, turn and backup lamp bulbs are located in the tail lamp
assembly. Follow the same steps to replace either bulb.

1. Make sure the headlamp switch is
in the OFF position and open the
liftgate.

2. Remove the two screws in the
liftgate opening, then pull the lamp
assembly away from the vehicle.

3. Remove the bulb socket by
rotating it counterclockwise, then
pulling it out of the lamp assembly.

4. Pull the bulb straight from the
socket.

Install new bulb(s) in reverse order.

2005 Freestyle (219)
Owners Guide (post-2002-fmt)
USA_English
(fus)

Lights

59