FORD 2005 Explorer v.2 - Manual (Page 302)

2 Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be checked by a qualified
technician.
3 Add the coolant type originally equipped in your vehicle.
4 Limited Slip differentials must add 4 oz (118 ml) of Additive Friction
Modifier XL-3 or equivalent to the rear axle whenever the axle has been
serviced.
5 Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification and the API
Certification mark.
5 Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only have the API Certification mark and meet the requirements
of Ford specification WSS-M2C929-A (4.0L) or WSS-M2C930-A (4.6L).
LUBRICANT SPECIFICATIONS
Item
Ford Part
Name or
equivalent
Ford Part
Number Ford
Specification
Body hinges,
latches, door
striker plates and
rotors, seat
tracks, fuel filler
door hinge and
spring, hood
latch, auxiliary
latch, seat tracks
Multi-Purpose
Grease or
Multi-Purpose
Grease Spray
XG–4 or XL–5
ESR-M1C159-A
or ESB-M1C93–B
Hydraulic brake
fluid and Clutch
Fluid (if
equipped)
Motorcraft High
Performance
DOT 3 Motor
Vehicle Brake
Fluid
PM-1
ESA-M6C25-A,
DOT 3
Driveshaft, slip
spline, universal
joints
Premium Long
Life Grease XG-1-C or
XG-1-K
ESA-M1C75-B
2005 Explorer (exp)
Owners Guide (post-2002-fmt)
USA_English (fus)
Maintenance and Specifications
302