Maintenance and specifications – FORD 2005 Escape Hybrid v.2 User Manual
Page 291
Item
Ford Part
Name or
equivalent
Ford Part
Number
Ford
Specification
Power
Take-off(PTO)
3
(4WD)
Motorcraft SAE
75W-140 High
Performance
Rear Axle
Lubricant
XY-75W140–QL
WSL-M2C192-A
Windshield washer
fluid
Motorcraft
Premium
Windshield
Washer
Concentrate
ZC-32–A
WSB-M8B16–A2
1
DO NOT USE Motorcraft Specialty Orange Engine Coolant VC-2. Refer
to Adding engine coolant, in the this chapter.
2
Using any transmission fluid other than those that meet the
recommended specification may cause internal transaxle damage. Do
NOT use Motorcraft MERCON
CVT (blue) ATF. This vehicle uses only
Motorcraft MERCON
(red) ATF.
3
The Power Take-off (PTO) is lubricated for life with synthetic lube.
Lubricant levels are not to be checked or changed unless a leak is
suspected or repair required. Replace Power Take-off (PTO) lubricant
with specified synthetic lubricant anytime the unit is submerged in
water.
4
4WD vehicles exposed for prolonged periods to temperatures less than
–40° C (-40° F) should change out the rear axle fluid to Motorcraft SAE
75W-140 High Performance Rear Axle Lubricant, Ford part number
XY-75W140–QL meeting Ford specification WSL-M2C192–A.
2005 Escape Hybrid (hev)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
291