beautypg.com

To remove the spare tire, Tire change procedure, Preparing to change the tire – FORD 2005 E-450 v.3 User Manual

Page 111: Tires, wheels and loading

background image

To remove the spare tire:

1. Open the rear doors and remove
the thumb screw and anti-theft
bracket. If finger pressure will not
remove the thumb screw, use the
lug wrench to loosen the screw.

2. Remove the access plug under
the left door.

3. Remove the jack handle from the
right side compartment and insert
the tip of the jack handle through
the access hole and into the tube.

4. Turn the jack handle
counterclockwise until the cable is
slack and the tire can be slid from
under the vehicle.

5. Remove the retainer from the
spare tire.

To stow the cable retainer with the spare removed, turn the jack handle
clockwise until all slack is removed.

Tire change procedure

Preparing to change the tire

To help prevent the vehicle from moving when you change a tire,
be sure the parking brake is set, then block (in both directions)

the wheel that is diagonally opposite (other side and end of the
vehicle) to the tire being changed.

1. Park on a level surface.

2. Activate the warning flashers.

3. Place the gearshift in P (Park).

2005 Econoline (eco)
Owners Guide (post-2002-fmt)
USA
(fus)

Tires, Wheels and Loading

111

This manual is related to the following products: