FORD 2006 F-150 v.2 - Manual (Page 317)

Fluid Ford Part
Name Application Capacity
Power
steering
fluid Motorcraft
MERCON
௡
ATF
All Fill to between MIN
and MAX lines on
reservoir
Transfer
case fluid Motorcraft
MERCON
௡
ATF
4x4 vehicles 2.0 quarts (1.9L) 2
Transmission
fluid
3
Motorcraft
MERCON
௡
ATF
5–speed manual 3.75 quarts (3.5L)
Motorcraft
MERCON
௡V
ATF
Automatic 4R70E
and 4R75E 13.9 quarts (13.2L) 4
Front axle Motorcraft
SAE 80W-90
Premium
Rear Axle
Lubricant 4x4 vehicles 3.7 pints (2.0L)
Rear axle 5 Motorcraft
SAE
75W-140
Rear Axle
Lubricant
(synthetic) 8.8/9.75 inch axle 5.5 pints (2.6L) 6
10.25 inch axle 6.9 pints (3.3L) 7
Windshield
washer fluid Motorcraft
Premium
Windshield
Washer
Concentrate All 4.25 quarts (4.0L)
1 Add the coolant type originally equipped in your vehicle.
2 Service refill capacity is determined by filling the transfer case to the
bottom of the filler hole with the vehicle on a level surface.
3 Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. Check the container to verify the fluid being added is of the
correct type. Refer to your scheduled maintenance information to
determine the correct service interval.
Some transmission fluids may be labeled as dual usage, such as
MERCON
௡ and MERCON௡ V. These dual usage fluids are not to be used
2006 F-150 (f12)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
317