FORD 2006 Escape Hybrid v.1 - Manual (Page 294)

Item Ford Part
Name or
equivalent Ford Part
Number Ford
Specification
Automatic eCVT
transaxle
2
Motorcraft
MERCON
௡ (red)
Multi-Purpose
ATF
XT-2-QDX MERCON
Rear axle
(4WD)
4
Motorcraft SAE
80W-90
Premium Rear
Axle Lubricant XY-80W90-QL WSP-M2C197-A
Power Transfer
Unit
3 (4WD)
Motorcraft SAE
75W-140 High
Performance
Rear Axle
Lubricant XY-75W140–QL WSL-M2C192-A
Windshield
washer fluid Motorcraft
Premium
Windshield
Washer
Concentrate ZC-32–A WSB-M8B16–A2
1 DO NOT USE Motorcraft Specialty Orange Engine Coolant VC-2. Refer
to Adding engine coolant, in the this chapter.
2 Using any transmission fluid other than those that meet the
recommended specification may cause internal transaxle damage. Do
NOT use Motorcraft MERCON
௡ CVT (blue) ATF. This vehicle uses only
Motorcraft MERCON
௡ (red) ATF.
3 The Power Transfer Unit is lubricated for life with synthetic lube.
Lubricant levels are not to be checked or changed unless a leak is
suspected or repair required. Replace Power Transfer Unit lubricant with
specified synthetic lubricant anytime the unit is submerged in water.
4 4WD vehicles exposed for prolonged periods to temperatures less than
–40° C (-40° F) should change out the rear axle fluid to Motorcraft SAE
75W-140 High Performance Rear Axle Lubricant, Ford part number
XY-75W140–QL meeting Ford specification WSL-M2C192–A.
2006 Escape Hybrid (hev)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
294