FORD 2006 Escape Hybrid v.1 - Manual (Page 269)

Checking engine coolant
The concentration and level of
engine coolant should be checked at
the mileage intervals listed in
Scheduled Maintenance
information. The coolant
concentration should be maintained
at 50/50 coolant and distilled water,
which equates to a freeze point of
-34°F (-36°C). Coolant
concentration testing is possible
with a hydrometer or antifreeze
tester (such as the Rotunda Battery
and Antifreeze Tester, 014–R1060).
The level of coolant should be
maintained at the “FULL COLD”
level or within the “COLD FILL
RANGE” in the coolant reservoir. If
the level falls below, add coolant per
the instructions in the Adding
engine coolant section. When the
engine is cold, check the level of
engine coolant in the reservoir.
2006 Escape Hybrid (hev)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
269