beautypg.com

Maintenance and specifications – FORD 2006 Crown Victoria v.2 User Manual

Page 254

background image

Fluid

Ford Part Name

Capacity

Fuel tank

N/A

19.0 gallons (71.9L)

Rear axle lubricant

5

Motorcraft SAE
80W-90 Premium Rear
Axle Lubricant

5.0 pints (2.4L)

7

Windshield washer
fluid

Motorcraft Premium
Windshield Washer
Concentrate

Fill to line on reservoir

1

Use only brake fluids certified to meet Ford specifications. Refer to

Lubricant Specifications in this chapter. DOT 3 fluid is recommended.
However, if DOT 3 is not available, DOT 4 fluid can be used.

2

Ensure the correct automatic transmission fluid is used. MERCON

௡ and

MERCON

௡ V are not interchangeable. DO NOT MIX MERCON௡ and

MERCON

௡ V. Refer to the scheduled maintenance information to

determine the correct service interval.

3

Indicates only approximate dry-fill capacity. Some applications may vary

based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick’s normal operating range. Police or Handling Package refill
capacity- 12.8 quarts (12.1L).

4

Add the coolant type originally equipped in your vehicle.

5

Rear axles are considered lubricated for life when the vehicle is used for

normal service. See your scheduled maintenance information for
Severe Duty requirements.

6

Use of synthetic or synthetic blend motor oil is not mandatory. Engine

oil need only meet the requirements of Ford specification
WSS-M2C930-A and the API Certification mark.

7

Service refill capacities are determined by filling the rear axle 1/4 inch

to 9/16 inch (6 mm to 14 mm) below the bottom of the filler hole.

2006 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA
(fus)

Maintenance and Specifications

254