beautypg.com

Keyless entry system (if equipped), Programming a personal entry code, Locks and security – FORD 2007 Explorer Sport Trac v.2 User Manual

Page 116

background image

The inside lights will not turn off if:
• they have been turned on with the dimmer control, or
• any door is open.
The battery saver will shut off the interior lamps 10 minutes after the
ignition has been turned to the 1 (OFF/LOCK) position.

KEYLESS ENTRY SYSTEM (IF EQUIPPED)

You can use the keyless entry
keypad to:
• lock or unlock the doors without

using a key.

• activate or deactivate the

autolock feature.

The keypad can be operated with
the factory set 5–digit entry code;
this code is located on the owner’s
wallet card in the glove box, is
marked on the computer module,
and is available from your
authorized dealer. You can also
create your own 5–digit personal
entry code. In the event the wallet
card is lost, the factory set code cannot be reprogrammed.

When pressing the controls on the keypad, press the middle of the
controls to ensure a good activation.

Programming a personal entry code

Up to three personal entry codes may be programmed to the vehicle. To
create your own personal entry code:

1. Enter the factory set code.

2. Within five seconds press the 1

• 2 on the keypad.

3. Enter your personal 5-digit code. Each number must be entered
within five seconds of each other.

4. Press 1

• 2, 3 • 4 or 5 • 6 to indicate which of the three personal

entry code positions you wish to use.

5. The doors will again lock then unlock to confirm that your personal
key code has been programmed to the module.

2007 07+ Explorer Sport Trac (esp)
Owners Guide (post-2002-fmt)
USA
(fus)

Locks and Security

116