FORD 2007 Escape v.1 - Manual (Page 61)

• Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed press and release the SET ACC control.
Reducing speed while using speed control
There are two ways to reduce a set
speed:
• Press and hold the CST control
until you get to the desired
speed, then release the control.
You can also use the CST control
to operate the Tap-Down
function. Press and release this
control to decrease the vehicle set speed in small amounts by 1 mph
(1.6 km/h).
• Depress the brake pedal until the
desired vehicle speed is reached,
press the SET ACC control.
Turning off speed control
There are two ways to turn off the speed control:
• Depress the brake pedal or the clutch pedal (if equipped). This will
not erase your vehicle’s previously set speed.
• Press the OFF control.
Note: When you turn off the speed
control or the ignition, your speed
control set speed memory is erased.
RSM SET
ACC
CST
RSM SET
ACC
CST
ON
OFF
2007 Escape (204)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
61