beautypg.com

Driver controls, Multi-function lever, Windshield wiper/washer control – FORD 2007 Escape v.1 User Manual

Page 53

background image

MULTI-FUNCTION LEVER

Windshield wiper: For intermittent
operation, move control down one
position.

Adjust the rotary control to the
desired speed setting.

For normal or low speed wiper
operation, move control down two
positions from OFF.

For high speed wiper operation,
move control down three positions
from OFF.

Mist function: To activate mist,
push control up from the OFF
position and release to get one wipe.

Windshield washer: To activate
the windshield washer, pull control
toward you. Release control to stop
washer fluid spray.

Note: Do not operate the washer when the washer reservoir is empty.
This may cause the washer pump to overheat. Check the washer fluid
level frequently. Do not operate the wipers when the windshield is dry.
This may scratch the glass, damage the wiper blades and cause the wiper
motor to burn out. Before operating the wiper on a dry windshield,
always use the windshield washer. In freezing weather, be sure the wiper
blades are not frozen to the windshield before operating the wipers.

2007 Escape (204)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

53