beautypg.com

Power steering fluid, Brake fluid, Maintenance and specifications – FORD 2007 Crown Victoria v.2 User Manual

Page 248

background image

POWER STEERING FLUID

Check the power steering fluid.
Refer to scheduled maintenance
information
for the service interval
schedules. If adding fluid is
necessary, use only MERCON

ATF.

1. Start the engine and let it run until it reaches normal operating
temperature (the engine coolant temperature gauge indicator will be
near the center of the normal area between H and C).

2. While the engine idles, turn the steering wheel left and right several
times.

3. Turn the engine off.

4. Check the fluid level in the
reservoir. It should be between the
MIN and MAX lines. Do not add
fluid if the level is in this range.

5. If the fluid is low, add fluid in small amounts, continuously checking
the level until it reaches the range between the MIN and MAX lines. Be
sure to put the cap back on the reservoir.

BRAKE FLUID

The fluid level will drop slowly as
the brakes wear, and will rise when
the brake components are replaced.
Fluid levels below the “MAX” line
that do not trigger the brake system
warning lamp are within the normal
operating range, there is no need to

DO

NOT

OV

ERFILL

P

O

W

ER

ST

EE

R

IN

G

FLU

ID

MAX

MIN

MAX

2007 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA
(fus)

Maintenance and Specifications

248