beautypg.com

Opening the trunk, Activating the memory feature, Deactivating the memory feature – FORD 2008 Taurus v.2 User Manual

Page 130: Locks and security

background image

Note: The panic alarm will only operate when the ignition is in the 1
(LOCK) position.

Opening the trunk

Press

twice within 3 seconds to open the trunk.

• Ensure that the trunk is closed and latched before driving your

vehicle. Failure to properly latch the trunk may cause objects to fall
out or block the driver’s rear view.

The Integrated Keyhead Transmitter allows you to recall the memory
seat/mirror feature.

Press

to automatically move the seat/mirrors to the desired memory

position. Note: The seat will not travel to its final position if the key is
not in the ignition and the easy entry feature is enabled.

Activating the memory feature

To activate this feature:

1. Position the seat and mirrors to the desired positions.

2. Press the SET control on the
driver’s door panel.

3. Within 5 five seconds, press the
lock or unlock control on the
Integrated keyhead Transmitter and
then press the 1 or 2 control on the
driver’s door panel which you would
like to associate with the seat and
Driver 1 or Driver 2 positions.

4. Repeat this procedure for another
Integrated Keyhead Transmitter if desired.

Deactivating the memory feature

To deactivate this feature:

1. Press the SET control on the driver’s door panel.

2. Within five seconds, press the lock or unlock control on the Integrated
Keyhead Transmitter which you would like to deactivate and then press
the SET control on the driver’s door panel again.

3. Repeat this procedure for another Integrated Keyhead Transmitter if
desired.

2008 Taurus (500)
Owners Guide (post-2002-fmt)
USA
(fus)

Locks and Security

130