beautypg.com

Foglamp control (if equipped), High beams, Lights – FORD 2008 Taurus v.1 User Manual

Page 80

background image

3. Turn the ignition switch to RUN and then back to LOCK.

4. Turn the headlamp switch to the autolamp position. The headlamps
will turn on.

5. Wait the desired amount of time for the exit delay you want (up to
three minutes), then turn the headlamp switch to

. The headlamps

will turn off.

Foglamp control (if equipped)

With the ignition on, the foglamps
can be turned on when the
headlamp control is pulled toward
you and is in any of the following
positions:
• Parking lamps
• Low beams
• Autolamps (when active)
The foglamps will not operate when
the high beams are active.

High beams

Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.

OFF

2008 Taurus (tau)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

80