beautypg.com

Starting the engine, Driving – FORD 2008 Taurus v.1 User Manual

Page 217

background image

• Make sure the gearshift lever is in

P (Park).

3. Turn the key to 3 (RUN) without
turning the key to 4 (START).

Some warning lights will briefly illuminate. See Warning lights and
chimes
in the Instrument Cluster chapter for more information
regarding the warning lights.

Starting the engine

1. Turn the key to 3 (RUN) without
turning the key to 4 (START).

2. Turn the key to 4 (START), then
release the key as soon as the
engine starts. Excessive cranking
could damage the starter.

Note: If the engine does not start within five seconds on the first try,
turn the key to LOCK, wait 10 seconds and try again. If the engine still
fails to start, press the accelerator to the floor and try again; this will
allow the engine to crank with the fuel shut off in case the engine is
flooded with fuel.

2008 Taurus (tau)
Owners Guide (post-2002-fmt)
USA
(fus)

Driving

217