beautypg.com

Replacing front parking lamp/turn signal bulbs, Replacing side marker bulbs, Lights – FORD 2008 Focus v.1 User Manual

Page 41

background image

Replacing front parking lamp/turn signal bulbs

1. Make sure the headlamp control
is in the OFF position and open the
hood.

2. Remove two push pins from the
radiator grille on the side being
serviced and push the grille back to
access the lower screw.

3. Remove three bolts and washers
from the headlamp assembly.

4. Carefully pull the headlamp
assembly up and away from the vehicle to disengage the spring clip
located on the bottom of the headlamp assembly.

5. Remove the bulb socket from the
lamp assembly by turning
counterclockwise.

6. Pull the bulb straight out of the
socket.

Install the new bulb in reverse
order.

Replacing side marker bulbs

1. Make sure the headlamp control
is in the OFF position and open the
hood.

2. Remove two push pins from the
radiator grille on the side being
serviced and push the grille back to
access the lower screw.

3. Remove three bolts and washers
from the headlamp assembly.

4. Carefully pull the headlamp
assembly up and away from the vehicle to disengage the spring clip
located on the bottom of the headlamp assembly.

2008 Focus (foc)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

41

This manual is related to the following products: