beautypg.com

Autolock, Autounlock, Reverse sensing system (park aid) (if equipped) – FORD 2008 Explorer Sport Trac v.1 User Manual

Page 117: Driver controls

background image

Note: “>” in front of a number indicates current selection.

3. Press the SELECT/RESET control switch for the next SETUP MENU
item or wait for more than 4 seconds to return to the INFO MENU.

Autolock

This feature automatically locks all vehicle doors when the vehicle is
shifted into any gear and when the vehicle is in motion over 13 mph
(20 km/h) or higher.

1. To disable/enable the autolock
feature, select this function from the
SETUP MENU.

2. Press and hold the
SELECT/RESET control switch to
turn the autolock feature ON or OFF.

3. Press the SELECT/RESET control switch for the next SETUP MENU
item or wait for more than 4 seconds to return to the INFO MENU.

Autounlock

This feature automatically unlocks all vehicle doors when the driver’s
door is opened within 10 minutes of the ignition being turned off.

1. To disable/enable the autounlock
feature, select this function from the
SETUP MENU.

2. Press and hold the
SELECT/RESET control switch to
turn the autounlock ON or OFF.

3. Press the SELECT/RESET control switch for the next SETUP MENU
item or wait for more than 4 seconds to return to the INFO MENU.

Reverse Sensing System (Park Aid) (if equipped)

This feature sounds a warning tone to warn the driver of obstacles near
the rear bumper, and functions only when R (Reverse) gear is selected.

1. To disable/enable the reverse
sensing system feature with the
vehicle in P (Park), select this
function from the SETUP MENU or
put the vehicle in R (Reverse).

2. Press and hold the
SELECT/RESET control switch to turn the park aid ON or OFF.

2008 07+ Explorer Sport Trac (esp)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

117