beautypg.com

Jump starting, Removing the jumper cables, Roadside emergencies – FORD 2008 Expedition v.1 User Manual

Page 323

background image

Jump starting

1. Start the engine of the booster vehicle and run the engine at
moderately increased speed.

2. Start the engine of the disabled vehicle.

3. Once the disabled vehicle has been started, run both engines for an
additional three minutes before disconnecting the jumper cables.

Removing the jumper cables

Remove the jumper cables in the reverse order that they were
connected.

1. Remove the jumper cable from the jump starting stud.

Note: In the illustrations, lightning bolts are used to designate the
assisting (boosting) battery.

+

+

2008 Expedition (exd)
Owners Guide (post-2002-fmt)
USA
(fus)

Roadside Emergencies

323