beautypg.com

Using the right bulbs, Replacing interior bulbs, Replacing exterior bulbs – FORD 2009 Focus v.1 User Manual

Page 46: Replacing headlamp bulbs, Lights

background image

Using the right bulbs

Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized “D.O.T.” for North America to ensure
lamp performance, light brightness and pattern and safe visibility. The
correct bulbs will not damage the lamp assembly or void the lamp
assembly warranty and will provide quality bulb burn time.

Function

Trade number

Headlamps

H13

Park and turn lamp (front)

3457 NAK or 3457AK

Side marker lamp (front)

168

Fog lamps (if equipped)

H11 LL

Stop/turn and tail lamps

3057K

Backup lamp

921

License plate lamp

C5W L

* High-mount brake lamp

LED

* To replace these lamps - see your authorized dealer.

To replace all instrument panel lights - see your authorized dealer

Replacing interior bulbs

Check the operation of all bulbs frequently.

Replacing exterior bulbs
Check the operation of all the bulbs frequently.

Replacing headlamp bulbs

1. Make sure the headlamp control
is in the off position and open the
hood.

2. Remove four push pins from the
radiator grille and pull the grille
forward to access the lower screw.

3. Remove three bolts and washers
from the headlamp assembly.

4. Carefully pull the headlamp
assembly up and away from the
vehicle to disengage the spring clip located on the bottom of the
headlamp assembly.
5. Disconnect electrical connector from the bulb.

2009 Focus (foc)
Owners Guide, 1st Printing
USA
(fus)

Lights

46