beautypg.com

Rear park aid (if equipped), Running boards (if equipped), Autolamp delay – FORD 2009 F-150 v.2 User Manual

Page 105: Driver controls

background image

Rear Park Aid (if equipped)

This feature sounds a warning tone to warn the driver of obstacles near
the rear bumper, and functions only when R (Reverse) gear is selected.

1. To disable/enable the reverse
sensing system feature with the
vehicle in P (Park), select this
function from the SETUP MENU or
put the vehicle in R (Reverse).

2. Press and hold the RESET control to turn the park aid ON or OFF.

3. Press the RESET control for the next SETUP MENU item or wait for
more than four seconds to return to the INFO MENU.

Running Boards (if equipped)

This feature automatically deploys the side running boards for easy
entry/exit from the vehicle or for cleaning.

1. To disable/enable the power
running board feature with the
vehicle in P (Park), select this
function from the SETUP control for
the current display mode.

2. Press the RESET control to select the running boards setting as
follows:

• AUTO: the running boards will automatically deploy when a door is

opened and automatically retract when the door is closed,

• OUT: the running boards will remain deployed regardless of the doors

being open/closed. This setting can be used when washing the vehicle, or
accessing the roof rack. The running boards will stow and enter AUTO
mode when the vehicle speed exceeds 5 mph (8 km/h),

• OFF: the running boards will remain IN regardless of the doors being

open/closed.

Autolamp delay

This feature keeps your headlights on for up to three minutes after the
ignition is switched off.

1. To disable/enable the autolamp
delay feature, select this function
from the SETUP control for the
current display mode.

2. Press the RESET control to select
the new Autolamp delay values of >0, >10, >20, >30, >60, >90, >120 or
>180.

2009 F-150 (f12)
Owners Guide, 2nd Printing
USA
(fus)

Driver Controls

105