FORD 2010 Fusion Hybrid v.2 - Manual (Page 21)

chime will also sound to remind you to fasten your safety belt. Refer to
the Seating and Safety Restraints chapter to activate/deactivate the
Belt-Minder
௡ chime feature.
Stop safely hazard warning
(RTT): Indicates Hybrid component
fault/failure that will cause the
vehicle to shutdown, fail to start or
enter into a limited operating mode. A message may also display in the
message center.
Note: If the vehicle is still running, the vehicle may soon
shutdown without further warning and should be stopped safely.
If this lamp is lit, stop the vehicle, shift to P (Park), turn the key to the
off position, and attempt to restart the vehicle. If the fault remains, the
vehicle may require refueling, jump starting or service. For information
regarding the low-voltage (12–volt) battery only, please refer to Jump
starting (low voltage [underhood] battery only) in the Roadside
Emergencies chapter.
Ready to drive: Illuminates once
the vehicle has successfully started
and will remain lit throughout the
drive. Indicates the vehicle is ready
to drive even when you don’t hear
the gasoline engine running.
Ready to drive (RTT): Illuminates
briefly once the vehicle has
successfully started. Indicates that
the vehicle is ready to drive even
when you don’t hear the gasoline
engine running.
Charging system (RTT):
Illuminates when the low-voltage
(12-volt) battery is not charging
properly. The message center
displays CHECK CHARGING SYSTEM. If it stays on while the vehicle is
running (Ready to drive indicator is illuminated), there may be a
malfunction with the charging system. Contact your authorized dealer as
soon as possible. This indicates a problem with the electrical system or a
related component.
Instrument Cluster
21
2010 Fusion Hybrid (hfv)
Owners Guide, 2nd Printing
USA (fus)