beautypg.com

Roadside emergencies – FORD 2010 Flex v.1 User Manual

Page 313

background image

4. Plug the power cable into the 12V
power point in the vehicle.

5. Remove the warning sticker found on the canister and place it on the
top of the instrument panel or the center of the dash.

6. Start the engine (only if the vehicle is outdoors or in a
well-ventilated area)
.

7. Turn dial (1) counterclockwise to
the sealant position. Turn on the kit
by pressing the on/off button (2).

8. Inflate the tire to the pressure
listed on the tire label located on
the driver’s door or the door jam
area.

Roadside Emergencies

313

2010 Flex (471)
Owners Guide, 1st Printing
USA
(fus)