beautypg.com

Starting the engine, Driving – FORD 2010 F-550 v.1 User Manual

Page 265

background image

If starting a vehicle with a manual
transmission:

1. Make sure the parking brake is
set.

2. Push the clutch pedal to the floor.

• Turn the key to 3 (on) without

turning the key to 4 (start).

Some warning lights will briefly illuminate. See Warning lights and
chimes
in the Instrument Cluster chapter for more information
regarding the warning lights.

Starting the engine

1. Turn the key to 3 (on) without
turning the key to 4 (start). If there
is difficulty in turning the key,
rotate the steering wheel until the
key turns freely. This condition may
occur when:
• the front wheels are turned
• a front wheel is against the curb
2. Turn the key to 4 (start), then
release the key as soon as the
engine begins cranking. Your vehicle has a computer assisted cranking
system that assists in starting the engine. After releasing the key from
the 4 (start) position, the engine may continue cranking for up to
10 seconds or until the vehicle starts.

Driving

265

2010 F-250/350/450/550 (f23)
Owners Guide, 1st Printing
USA
(fus)

This manual is related to the following products: