beautypg.com

Anti-theft indicator, Automatic arming, Automatic disarming – FORD 2010 E-450 v.1 User Manual

Page 82: Locks and security

background image

program your spare keys to your vehicle or you can program the keys
yourself. Refer to Programming spare keys for instructions on how to
program the coded key.
Note: The SecuriLock

௡ passive anti-theft system is not compatible with

non-Ford aftermarket remote start systems. Use of these systems may
result in vehicle starting problems and a loss of security protection.
Note: Large metallic objects, electronic devices that are used to
purchase gasoline or similar items, or a second coded key on the same
key chain may cause vehicle starting issues. You need to prevent these
objects from touching the coded key while starting the engine. These
objects will not cause damage to the coded key, but may cause a
momentary issue if they are too close to the key when starting the
engine. If a problem occurs, turn the ignition off, remove all objects on
the key chain away from the coded key and restart the engine.
Note: Do not leave a duplicate coded key in the vehicle. Always
take your keys and lock all doors when leaving the vehicle.
Anti-theft indicator
The anti-theft indicator is located in the instrument cluster.

Vehicles equipped with the
SecuriLock

௡ Passive Anti-theft

system behave as follows:
• When the ignition is in the off

position, the indicator will flash once every two seconds for a total of
10 seconds to indicate the SecuriLock

௡ system is functioning as a

theft deterrent.

• When the ignition is in the on position, the indicator will glow for

three seconds to indicate a programmed key has been validated and
the SecuriLock

௡ Passive Anti-theft system has enabled the engine.

Vehicles without the SecuriLock

௡ Passive Anti-theft system behave as

follows:
• When the ignition is in the off position, the indicator will not flash.

• When the ignition is in the on position, the indicator will glow for

three seconds to indicate the engine is enabled.

Automatic arming
The vehicle is armed immediately after switching the ignition to the off
position.
Automatic disarming
Switching the ignition to the on position with a coded key disarms the
vehicle.

Locks and Security

82

2010 Econoline (eco)
Owners Guide, 1st Printing
USA
(fus)

This manual is related to the following products: