beautypg.com

Tires, wheels and loading – FORD 2010 E-450 v.1 User Manual

Page 186

background image

smooth and effective trailer braking by powering the trailer’s electric
brakes with a proportional output based on the towing vehicle’s brake
pressure.

WARNING: The Ford TBC has only been verified to be
compatible with trailers having electric-actuated drum brakes

(one to four axles) and not hydraulic surge or electric-over-hydraulic
types. It is the responsibility of the customer to ensure that the trailer
brakes are adjusted appropriately, functioning normally and all electric
connections are properly made.

The TBC user interface consists of
the following:

1. +/- (GAIN adjustment
buttons):
Pressing these buttons
will adjust the TBC’s power output
to the trailer brakes (in
0.5 increments). The GAIN setting
can be increased to a maximum of
10.0 or decreased to a minimum of 0 (no trailer braking). Pressing and
holding a button will raise or lower the setting continuously. The gain
setting will display in the message center as follows: TBC GAIN = XX.X.

The trailer brake controller (TBC) is designed to display three items of
information in the instrument cluster message center. These are: gain
setting, output bar graph, and trailer connectivity status. They will
appear as follows in the message center.
TBC GAIN = XX.X NO TRAILER: The instrument cluster message

center will display the current gain setting during a given ignition
cycle and when adjusting the gain. This message is also displayed
during manual activation without a trailer connected or when gain
adjustments are made with no trailer connected.

TBC GAIN = XX.X OUTPUT = //////: When the vehicle’s brake pedal

is pushed, or when the manual control is activated, bar indicators will
illuminate in the instrument cluster message center to indicate the
amount of power going to the trailer brakes relative to the brake pedal
or manual control input. One bar indicates the least amount of output
with six bars indicating maximum output.

TRAILER CONNECTED: This message is displayed when a correct

trailer wiring connection (a trailer with electric trailer brakes) has
been sensed during a given ignition cycle.

Tires, Wheels and Loading

186

2010 Econoline (eco)
Owners Guide, 1st Printing
USA
(fus)

This manual is related to the following products: