beautypg.com

Locks and security – FORD 2011 F-150 v.3 User Manual

Page 149

background image

Keyless entry keypad autounlock enable/disable procedure

1. Turn the ignition to the off
position.

2. Close all the doors.

3. Enter factory–set 5–digit entry
code.

4. Press and hold the 3

• 4. While holding the 3 • 4, press and release

the 7

• 8. While still holding the 3 • 4, press and release the 7 • 8 a

second time.

5. Release the 3

• 4.

The user should receive a horn chirp to indicate the system has been
disabled or a chirp followed by a honk to indicate the system has been
enabled.

CHILDPROOF DOOR LOCKS (ON VEHICLES WITH REAR DOORS)
• When these locks are set, the

rear doors cannot be opened from
the inside.

• The rear doors can be opened

from the outside when the
childproof door locks are set, but
the doors are unlocked.

The childproof locks are located on
the rear edge of each rear door and
must be set separately for each
door. Setting the lock for one door
will not automatically set the lock
for both doors.
• Insert the key and turn to the

lock position (key horizontal) to
engage the childproof locks.

• Insert the key and turn to the

unlock position (key vertical) to
disengage the childproof locks.

Locks and Security

149

2011 F-150 (f12)
Owners Guide, 3rd Printing
USA
(fus)

This manual is related to the following products: