Settings, Instrument cluster – FORD 2011 Explorer v.1 User Manual
Page 41
Settings
In this mode, you can configure different driver setting choices. Press
the right arrow key (when in the Settings menu) to reach the listed
modes below:
Note: Some items are optional and may not appear.
Driver Assist
Traction Control
On / Off
Blind Spot
On (default on key cycle) / Off
Collision Warning Sensitivity (if
MyKey™ is
programmed)
High / Normal / Low
Chimes
On (default on key cycle) / Off
Warn-
On (default on key cycle) / Off
Cross Traffic
Alert
On (default on key cycle) / Off
Cruise Control
Adaptive or Normal
Rear Park Aid
On (default on key cycle) / Off
Trailer Sway
On (default on key cycle) / Off
Vehicle
Autolamp Delay
Off, 10 / 20 (default setting) / 30 / 60 / 90 / 120 /
180 seconds
Easy Entry/Exit
On (default on key cycle) / Off
Fuel
DTE Calculation
Normal or Towing
Long Term Econ Hold OK to Reset...
Locks
Autolock,
On (default on key cycle) / Off
Autounlock
On (default on key cycle) / Off
Remote
Unlocking
All doors / Driver’s door
Menu Control
Standard / Memory On
Oil Life Reset
Set to 10–100%
Power Liftgate
Enable / Disable
Instrument Cluster
40
2011 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)