System check, Demo, Tutorial – FORD 2012 Fusion Hybrid User Manual
Page 45: Instrument cluster
Clear MyKey
While Clear MyKey is highlighted, press RESET to select it and move
right to display the following:
• Confirm
Press SETUP for two seconds to confirm or press INFO to cancel.
System Check
Press SETUP to reach System Check.
While System Check is highlighted, press RESET to cycle the message
center through each of the systems being monitored:
1. OIL LIFE
8. BRAKE SYSTEM
2. ELECTRIC DRIVE
9. FUEL LEVEL XXX MI (KM)
3. CHARGING SYSTEM
10. MYKEY USED (if MyKey
is
programmed)
4. DOORS
11. MYKEY DISTANCE (if MyKey
is programmed)
5. TRUNK
12. MYKEY(S) PROGRAMMED
6. BLINDSPOT (if equipped)
13. ADMIN KEY(S)
PROGRAMMED
7. CROSS TRAFFIC (if equipped)
Demo
The demo briefly displays each of the gauge displays available.
Press SETUP to reach Demo.
While Demo is highlighted, press RESET to start the demo. Pressing
INFO, SETUP or RESET will exit the demo.
Tutorial
The tutorial is a self-paced guide that provides a brief overview of
instrument cluster features.
Press SETUP to reach Tutorial.
While Tutorial is highlighted, press RESET to start the tutorial. Use the
INFO, SETUP and RESET buttons to navigate through the tutorial.
Instrument Cluster
45
2012 Fusion Hybrid (hfv)
Owners Guide, 1st Printing
USA (fus)