FORD 2013 Fusion v.3 - Manual (Page 97)

Action Message
Select park for the system to restart the engine. Auto StartStop Shift to
P Restart Engine
The system is not functioning. A manual restart is required. Auto StartStop Manual
Restart Required
Displays when conditions are not met for the Auto StartStop
system to function properly See Start-Stop (page 150).
Auto StartStop Not
Available
StartStop has shutoff the engine automatically. Engine Stopped
The wheels are at a sharp angle or the steering wheel is being
turned.
Engine On due to Vehicle
Maneuvering
The wheels are at a sharp angle or the steering wheel is being
turned.
Engine On due to
Steering Wheel Maneuv-
ering
Engine may be on to support high demand for electrical
accessories, such as operating power windows, rear defroster,
or when using the power point.
Engine On due to
Accessory Usage
Engine is on to support normal vehicle operation. Includes
external vehicle conditions, such as altitude, traffic, low
ambient temperature. Also includes battery outside optimal
operating conditions (state of charge and temperature), and
inadequate brake vacuum (can occur if the brake pedal is
depressed a number of times in succession).
Engine On Normal Oper-
ation
Engine is on to achieve or maintain interior compartment at
an acceptable level.
Heating or Cooling
Engine is on, which is required to support the use of the power
outlet (110V).
Power Outlet in Use
Automatic Engine Shutdown
Action Message
Displays when the engine is getting ready to shut off. Engine Shuts Off in XX
Seconds
Displays when the engine has shut off to help increase fuel
economy.
Engine Shut Off for Fuel
Economy
Displays when the engine is getting ready to shut off. You can
press OK on the left steering wheel button to override the shut
down.
Engine Shuts Off in XX
Seconds Press Ok to
Override
94
Fusion/Mondeo (CC7)
Information Displays