beautypg.com

Roadside emergencies 297 – FORD 2013 Focus Electric User Manual

Page 297

background image

4. Plug the power cable into the
12V power point in the vehicle.

5. Remove the warning sticker found on the canister and place it on the
top of the instrument panel or the center of the dash.

6. Note: Start the motor only if the vehicle is outdoors or in a
well-ventilated area.

7. Turn dial (1) counterclockwise to
the sealant position. Turn on the kit
by pressing the on/off button (2).

8. Inflate the tire to the pressure
listed on the tire label located on
the driver’s door or the door jamb
area.

Note: When the sealing compound is first added into the tire, the air
pressure gauge reading on the compressor unit may indicate a higher

Roadside Emergencies

297

2013 Focus Electric Vehicle (fob)
Owners Guide gf, 1st Printing
USA
(fus)