Setting the gap distance, Cruise control 235 – FORD 2013 Flex v.3 User Manual
Page 236

When a vehicle ahead of you enters the same lane or a slower vehicle is
ahead in the same lane, the vehicle speed will adjust automatically to
maintain a preset gap distance. The distance setting is adjustable.
The lead vehicle graphic will be illuminated.
The vehicle will maintain a constant distance between the vehicle ahead
until:
• the vehicle in front of you accelerates to a speed above the set speed
• the vehicle in front of you moves out of your lane or out of view
• the vehicle speed falls below 16 mph (26 km/h)
• a new gap distance is set.
The vehicle brakes will be automatically applied to slow the vehicle to
maintain a safe distance from the vehicle in front. The maximum braking
which is applied by the system is limited and can be overridden by the
driver applying the brakes.
If the system predicts that its maximum braking level will not be
sufficient, an audible warning will sound while the system continues to
brake. This is accompanied by a heads-up display; a red warning bar
illuminating on the windshield. Take immediate action.
Setting the Gap Distance
Note: It is your responsibility to select a gap appropriate to the driving
conditions.
You can decrease or increase the
distance between your vehicle and
the vehicle in front of you by
pressing the GAP control up or
down. The selected gap will display
in the information display as shown by the bars in the graphic. Four gap
distance settings are available.
Graphic display
(bars between
vehicles)
Following
distance
Following
distance at
60 mph
(100 km/h)
Dynamic
behavior
1 bar
1 second
29 yards (28 m) Sporty
2 bars
1.5 seconds
44 yards (42 m) Normal
3 bars
1.9 seconds
56 yards (53 m) Normal
4 bars
2.3 seconds
66 yards (64 m) Comfort
Each time you restart your vehicle, the system will select the last chosen
gap for the current.
Cruise Control
235
2013 Flex (471)
Owners Guide gf, 3rd Printing, December 2012
USA (fus)