FORD 2013 F-150 v.2 - Manual (Page 283)

To exit four-wheel-down towing and return the transfer case to its 2H
position:
1. With your vehicle still properly secured to the tow vehicle, press and
hold the brake pedal.
2. Turn the ignition to the on position. Do not start the engine.
3. Shift the transmission out of N and into any gear.
4. Release the brake pedal.
• If completed successfully, the instrument cluster displays 4X2,
and NEUTRAL TOW DISABLED.
• If the indicator light and message do not display, you must
perform the procedure again from the beginning.
• You may hear an audible noise as the transfer case shifts out of its
neutral position. This is normal.
5. Apply the parking brake, and then disconnect the vehicle from the
tow vehicle.
6. Release the parking brake, start the engine, and shift the
transmission to position D to make sure the transfer case is out of
position N.
7. If the transfer case does not successfully shift out of position N, set
the parking brake until you can have your vehicle serviced.
282 Towing
2013 F-150 (f12)
Owners Guide gf, 2nd Printing, October 2012
USA (fus)