FORD 2013 F-150 v.1 - Manual (Page 380)

4. Slide the retainer through the center of the wheel.
5. Block the diagonally opposite
wheel.
• Obtain the spare tire and jack from their storage locations. Note: The
F-150 SVT Raptor also includes a chock, saddle extension and wing
bolt.
• Use the tip of the lug wrench to remove any wheel trim that is
blocking the lug nuts.
6. Loosen each wheel lug nut one-half turn counterclockwise, but do not
remove them until the wheel is raised off the ground.
Note: For the F-150 SVT Raptor, install the saddle extension on the jack
as shown in the jack usage and storage instructions.
7. Position the jack according to the following guides and turn the jack
handle clockwise until the wheel is completely off the ground.
• Front
Note: Use the frame rail as the jacking location point, NOT the control
arm.
Note: For the F-150 SVT Raptor, you must always use the jack saddle
extension.
380 Wheels and Tires
2013 F-150 (f12)
Owners Guide gf, 1st Printing
USA (fus)