Navigation system (if equipped), Setting a destination, Navigation system – FORD 2013 Explorer v.3 User Manual
Page 542: Myford touch ா (if equipped) 541
![background image](/manuals/602056/542/background.png)
“TEMPERATURE”
“High”
“Low”
“<15.5–29.5> degrees”
“<60–85> degrees”
“Help”
NAVIGATION SYSTEM (IF EQUIPPED)
Note: The navigation SD card must be in the SD card slot to operate the
navigation system. If you need a replacement SD card, see your
authorized dealer.
Note: The SD card slot is spring-loaded. To remove the SD card, just
push the card in and release it. Do not attempt to pull the card out to
remove it; this could cause damage.
Your navigation system is comprised of two main features, destination
mode and map mode.
To set a destination, press the green corner of your touchscreen, then
the Dest button when it appears. See Setting a destination later in this
chapter.
To view the navigation map and the vehicle’s current location, touch the
green bar in the upper right hand corner of the touchscreen, or press
Dest > Map. See Map mode later in this chapter.
Setting a Destination
Press the green corner of your touchscreen, then the Dest button when
it appears. Choose any of the following:
Destination Selections
My Home
Street Address
Favorites
Intersection
Previous Destinations
City Center
Point of Interest
Map
Emergency
Edit Route Cancel Route
Previous Starting Point
Freeway Entrance/Exit
Latitude/Longitude
MyFord Touch
ா (If Equipped)
541
2013 Explorer (exp)
Owners Guide gf, 3rd Printing
USA (fus)