FORD 2013 Explorer v.3 - Manual (Page 30)

7. Try to pull the belt out of the retractor to make sure the retractor is
in the automatic locking mode (you should not be able to pull more belt
out). If the retractor is not locked, repeat Steps 5 and 6.
8. Remove remaining slack from the belt. Force the seat down with extra
weight, e.g., by pressing down or kneeling on the child restraint while
pulling up on the shoulder belt (for standard safety belt) or pulling down
on the lap belt (for inflatable safety belt) in order to force slack from the
belt. This is necessary to remove the remaining slack that will exist once
the extra weight of the child is added to the child restraint. It also helps
to achieve the proper snugness of the child seat to your vehicle.
Sometimes, a slight lean toward the buckle will additionally help to
remove remaining slack from the belt.
• Standard safety belt
• Inflatable safety belt
9. Attach the tether strap (if the child seat is equipped). See Using
Tether Straps later in this chapter.
Child Safety 29
2013 Explorer (exp)
Owners Guide gf, 3rd Printing
USA (fus)