FORD 2014 Mustang v.2 - Manual (Page 124)

• To improve the air conditioning cool down, drive with the windows
slightly open for 2-3 minutes after start-up or until you have aired out
the vehicle.
• You may feel a small amount of air from the floor vent regardless of
the air distribution setting you select.
During extreme high ambient temperatures when idling stationary for
extended periods in gear, run the air conditioning in the MAX A/C mode,
adjust the blower fan speed to the lowest setting and put the vehicle’s
transmission into position P (automatic transmission) to continue to
receive cool air from your air conditioning system.
For maximum cooling performance in AUTO mode, press MAX A/C.
For maximum cooling performance in manual override control:
1. Choose the Panel, A/C, and recirculated air controls.
2. Set the temperature to LO.
3. Set the fan to the highest blower setting.
To aid in side window defogging and demisting in cold or humid weather:
1. Select Floor/Panel.
2. Select A/C.
3. Adjust the temperature control to maintain comfort.
4. Set the fan speed to the highest setting.
5. Direct the outer instrument panel vents toward the side windows.
6. To increase airflow to the outer instrument panel vents, close the
vents located in the middle of the instrument panel.
HEATED WINDOWS AND MIRRORS (IF EQUIPPED)
Heated Rear Window
Note: The vehicle must be running to use this feature.
Press the control to clear the rear window of thin ice and fog. Press the
control again within 15 minutes to switch it off. It turns off automatically
after approximately 15 minutes, or when you switch off the ignition.
Do not use razor blades or other sharp objects to clean the inside
of the rear window or to remove decals from the inside of the
rear window. This may cause damage to the heated grid lines.
Your warranty does not cover this damage.
Climate Control 123
2014 05+ Mustang (197)
Owners Guide gf, 2nd Printing, May 2013
USA (fus)