FORD 2014 Fusion Hybrid v.2 - Manual (Page 366)

You can find more information on the rear
view camera in another chapter. See Rear
View Camera (page 181).
Enable Valet Mode
Note: If the system locks, and you need to
reset the PIN, enter 3681 and the system
unlocks.
Valet mode allows you to lock the system.
No information is accessible until the
system is unlocked with the correct PIN.
E142607
1. Press the Settings icon > Vehicle >
Enable Valet Mode.
2. When prompted, enter a four-digit PIN.
After you press Continue, the system locks
until you enter the PIN again.
Charge Point Light Ring
E142607
Press the Settings icon >
Vehicle > Charge Point Light
Ring, then select from the
following:
Charge point light ring
Illuminates when plugging in, opening doors, pressing the
unlock button on your remote, and while charging. On
Does not illuminate. Off
Cord Acknowledgement: Illuminates when plugging in. Limited
Charge Status: Illuminates when opening doors or
pressing the unlock button on your remote.
Note: Details on the charge port light ring
functions are in another chapter. See High
Voltage Battery (page 159).
Settings
Access and adjust system settings, voice
features, as well as phone, navigation and
wireless settings.
System
E142607
Press the Settings icon >
Settings > System, then select
from the following:
System
Select to have the touchscreen display in English, Spanish
or French. Language
Select to display units in kilometers or miles. Distance
Select to display units in Celsius or Fahrenheit. Temperature
Adjust the volume of voice prompts from the system. System Prompt Volume
363
Fusion/Mondeo (CC7)
MyFord Touch™
(If Equipped)