beautypg.com

Blind spot information system, See blind spot, Driving aids – FORD 2014 Fusion v.3 User Manual

Page 194

background image

BLIND SPOT INFORMATION
SYSTEM

Blind Spot Information System
(BLIS®) with Cross Traffic Alert

(If

Equipped)

WARNING

To help avoid injuries, NEVER use the
Blind Spot Information System as a
replacement for using the interior

and exterior mirrors and looking over your
shoulder before changing lanes. The Blind
Spot Information System is not a
replacement for careful driving.

A

A

E124788

The Blind Spot Information System aids
you in detecting vehicles that may have
entered the blind spot zone (A). The
detection area is on both sides of your
vehicle, extending rearward from the
exterior mirrors to approximately 10 ft
(3 m)beyond the bumper. The system
alerts you if certain vehicles enter the blind
spot zone while driving.

Cross Traffic Alert warns you of vehicles
approaching from the sides when the
transmission is in reverse (R).

Note: The Blind Spot Information System
does not prevent contact with other vehicles
or objects; nor detect parked vehicles,
people, animals or infrastructure (fences,
guardrails, trees, etc.). It only alerts you to
vehicles in the blind zones.

Note: When a vehicle passes quickly
through the blind zone, typically fewer than
two seconds, the system does not trigger.

Using the Systems

The Blind Spot Information System turns
on when you start the engine and you drive
you vehicle forward above 5 mph
(8 km/h); it remains on while the
transmission is in drive (D) or neutral (N).
If shifted out of drive (D) or neutral (N),
the system enters cross traffic alert mode.
Once shifted back into drive (D), the Blind
Spot Information System turns back on
when you drive your vehicle above 5 mph
(8 km/h).

Note: The Blind Spot Information System
does not function in reverse (R) or park (P)
or provide any additional warning when a
turn signal is on.

Note: Cross Traffic Alert detects
approaching vehicles from up to 46 ft
(14 m) away though coverage decreases
when the sensors are blocked. Reversing
slowly helps increase the coverage area and
effectiveness.

Note: For manual transmission vehicles,
the cross traffic alert will be active only if
the transmission is in reverse (R). If your
vehicle is rolling backwards and the
transmission is not in reverse (R) then Cross
Traffic Alert will not be active.

191

Fusion (CC7) , enUSA

Driving Aids