Maintenance – FORD 2014 F-550 v.3 User Manual
Page 236
E163744
Fluid levels above the safe range may
result in transmission failure. An overfill
condition of transmission fluid may cause
shift and engagement concerns, and
possible damage.
High fluid levels can be caused by an
overheating condition.
Adjusting Automatic Transmission
Fluid Levels
Note: Use of a non-approved automatic
transmission fluid may cause internal
transmission component damage.
Before adding any fluid, make sure the
correct type is used. The type of fluid used
is normally indicated on:
•
the dipstick handle.
•
See Capacities and Specifications
(page 292).
If necessary, add fluid in 8 fl oz (250 ml)
increments through the filler tube until the
level is correct.
Type A
E163745
Type B
E163746
If an overfill occurs, excess fluid should be
removed by a qualified technician.
Note: An overfill condition of transmission
fluid may cause shift and engagement
concerns, and possible damage.
Do not use supplemental transmission
fluid additives, treatments or cleaning
agents. The use of these materials may
affect transmission operation and result
in damage to internal transmission
components.
233
Super Duty (TFA)
Maintenance