beautypg.com

Locks – FORD 2015 Transit Connect User Manual

Page 59

background image

Smart Unlocks For Intelligent

Access Keys

(If Equipped)

This feature helps to prevent you from
unintentionally locking your intelligent
access key inside your vehicle’s passenger
compartment or rear cargo area.

When you lock your vehicle using the
power door lock control (with the door
open, vehicle in park and ignition off), your
vehicle will search for an intelligent access
key in the passenger compartment after
you close the door. If your vehicle finds a
key, all of the doors will immediately
unlock and the horn will chirp, indicating
that a key is inside.

In order to override the smart unlock
feature and intentionally lock the
intelligent access key inside your vehicle,
you can lock your vehicle after all doors
are closed by pressing the lock button on
another intelligent access key or touching
the locking area on the handle with another
intelligent access key in your hand.

When you open one of the front doors and
lock your vehicle using the power door lock
control, all doors will lock then unlock if,
the ignition is on, or the ignition is off and
the gearshift lever is not in park P.

Auto lock and Auto unlock Feature

Auto lock

The Auto lock feature will lock the doors
and liftgate when all of the following
conditions have been met:

All doors are closed.

The ignition is on.

Your vehicle is moving at a speed
greater than 12 mph (20 km/h) for
more than two seconds.

Auto unlock

The auto unlock feature will unlock all the
doors when all of the following conditions
have been met:

The ignition is on, all doors are closed,
and your vehicle is moving at a speed
greater than 12 mph (20 km/h) for
more than two seconds.

Your vehicle has come to a stop and
you switch the ignition off or to the
accessory position.

The driver door is opened within 10
minutes of you switching the ignition
off or to the accessory position.

Note: The doors will not auto unlock if your
vehicle has been electronically locked after
the ignition is turned off and before the
driver door is opened.

Enabling or Disabling Auto lock and
Auto unlock

Note: An authorized dealer or you can carry
out this procedure.

To enable or disable these features, do the
following:

1.

Switch the ignition on.

2. Press the power door unlock button

three times.

3. Switch the ignition off.

4. Press the power door unlock button

three times.

5. Switch the ignition on. The horn will

chirp indicating your vehicle is in
programming mode.

Auto lock: Press the power door lock
button for less than one second and
release. The horn will chirp once if disabled
or twice (one short and one long chirp) if
enabled.

56

Transit Connect (CHC) Canada/United States of America, enUSA, First Printing

Locks