Locks – FORD 2015 Fiesta User Manual

Page 59

Note: If a second valid passive key is
located within the liftgate detection range,
the liftgate can be closed.

Unlocking Your Vehicle

Note: When your vehicle remains locked
for longer than three days, the system will
enter an energy-saving mode. This is to
prevent your vehicle battery running out of
charge. When your vehicle is unlocked while
in this mode, the reaction time of the system
may be a little longer than normal. To exit
the energy-saving mode, unlock your
vehicle.

E87384

Press a locking button once.

Note: A valid passive key must be located
within the detection range of that door.

One long flash of the direction indicators
confirms that all the doors and the liftgate
have been unlocked and that the alarm
has been disarmed.

Unlocking Only the Driver Door

If the unlocking function is reprogrammed
so that only the driver door and the liftgate
are unlocked. See Remote Control (page
42). Note the following:

If the driver door is the first door which is
opened, the other doors will remain locked.
All the other doors can be unlocked from
inside your vehicle by pressing the unlock
button on the instrument panel.

Disabled Keys

Any keys left inside your vehicle interior
when it is locked will be disabled.

You cannot use a disabled key to switch
the ignition on or start the engine.

You must enable all passive keys again in
order to use them.

To enable all your passive keys, unlock your
vehicle using a passive key or the remote
control unlocking function.

All passive keys will then be enabled if you
switch the ignition on or you start your
vehicle with a valid key.

Locking and Unlocking the Doors
With the Key Blade

E87964

Carefully remove the cover.

2. Remove the key blade and insert it into

the lock.

Note: Only the driver door handle has a lock
cylinder.

Fiesta (CCT), enUSA, Second Printing

Locks