FORD 2015 F-550 v.2 - Manual (Page 299)

1. Align the ornament with the lug nuts.
A is the clip and B is the flange.
E162823
2. Hold the ornament so that all of the
retention clips are sitting on the flange
of the lug nuts.
A
C
B
D
E162824
3. Use your hand or rubber mallet to tap
the ornament in a star pattern. There
should be an even gap between the
ornament and the wheel.
4. Be sure to install all the clips on the
nuts over the flanges so that there is
an even gap all around and the
retention clips are fully seated.
E162825
E162826
Stowing the Flat or Spare Tire
Note: Failure to follow spare tire stowage
instructions may result in failure of cable or
loss of spare tire.
Note: If you are stowing a tire that requires
reattaching it to the vehicle with a tether,
perform these steps first, then proceed with
the following steps.
1. Place the tire on end with the valve
stem facing toward the front of the
vehicle.
2. Place the tether into the bolt holes in
the wheel and attach the lug nut using
the lug wrench.
296
Super Duty (), enUSA
Wheels and Tires